Configuring The Network Properties Of The Lan Card - Sirona CEREC MC XL Manual Del Usuario

2 Configuring the MC XL in the Ad-hoc mode

Configuring the network properties of the LAN card

Opening network connections
Opening network connections
Configuring the network properties
of the LAN card
6
Operating MC XL via WLAN in the Ad-hoc mode CEREC / inLab MC XL
2.2 Configuring the network properties of
the LAN card
Click "Start" / "Settings" / "Control panel" in the task bar.
1.
Double-click the "Network Connections" icon in the "Control
2.
panel" window.
The "Network Connections" window then opens.
NOTE: LAN connection used
If you no longer know which LAN connection you use, proceed as follows:
Disconnect the network cable from the socket and then connect it again.
At the same time, observe the status field in the network connections.
The status of the connection used changes.
1. Click the LAN connection you would like to configure with the right mouse
button and select "Properties" from the context menu.
The window with the Network Properties then opens.
Sirona Dental Systems GmbH
61 90 545 D 3439
D 3439.031.03.01.02 06.2007