Kit Assembly - Metra 95-5028 Instrucciones De Instalación

Double DIN radio provision
1. Attach the brackets to the radio
housing trim panel. (Figure A)
2. Slide the radio into the bracket/
radio housing assembly and secure
to the assembly using the screws
supplied with the radio. (Figure B)
3. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
4. Mount the new radio assembly into
the dash and reassemble dash in
reverse order of disassembly.

Kit Assembly

(Figure A)
95-5028
(Figure B)
3