Symbols Used; User Information; Important Notes; Safety Instructions - Bosch 1 687 010 183 Instrucciones De Funcionamiento

en �� | � ��� ��� ��� � � ��� ��� ��� | Symbols Used
1.

Symbols Used

Pictograms linked with the key words Danger, Warning
and Caution are warnings and always indicate an imme-
diate or potential hazard to the user.
Danger!
Immediate danger that could cause serious
personal injury or death.
Warning!
Potentially dangerous situation that could
cause serious personal injury or death.
Caution!
Potentially dangerous situation that could
cause personal injury or damage to property.
!
Important – warns of a potentially hazardous situati-
on in which the 1 687 010 183 / 1 687 010 184, the
test sample or other object in the vicinity could be
damaged.
In addition to these warnings, the following symbols are
also used:
i
Info – In addition to these warnings, the following
symbols are also used.
¶
Single-step procedure – instructions for a procedure
that can be completed in just one step.
? Intermediate result – an intermediate r esult is
displayed during a procedure.
!
Final result – the final result is displayed at the end
of the procedure.
|
1 689 979 986 2009-12-11
2.

User information

2.�

Important notes

Important information on copyright, liability and war-
ranty provisions, as well as on equipment users and com-
pany obligations, can be found in the separate manual
"Important notes on and safety instructions for Bosch
Diesel Test Equipment". These instructions must be carefully
studied prior to start-up, connection and operation of the
1 687 010 183 / 1 687 010 184 and must always be heeded.
2.2

Safety instructions

All the pertinent safety instructions can be found in the
separate manual "Important notes on and safety instruc-
tions for Bosch Diesel Test Equipment". These instruc-
tions must be carefully studied prior to start-up, connec-
tion and operation of the 1 687 010 183 / 1 687 010 184
and must always be heeded.
2.�

General information

These instructions are only valid in conjunction with the
instructions supplied with:
R
EPS 815 injection pump test bench (1 689 979 672)
R
KMA 802/822 continuous metering system
(1 689 979 674)
R
CRS 845 test set for common rail pumps
(1 689 979 863)
These instructions must also be stored and distributed
with the instructions listed above.
Robert Bosch GmbH