Uline OHAUS DEFENDER 5000 Manual Del Usuario página 15

Method 2
1. Press the softkey
corresponding to the
PCS icon to enter
the submenu for setting
the number of pieces.
(See Figure 48)
2. Press the softkey
corresponding to the
icon to edit the
PCS value using the
alphanumeric keypad.
(See Figure 49)
3. After editing, press the
softkey corresponding
to the icon for
confirmation, and
then press the softkey
corresponding to the
icon to exit the submenu. (See Figure 50)
The Counting Configurations are defined below.
NOTE: Defaults settings are in bold.
CONFIGURE ITEM OPTION
Auto Tare Off/On
Accumulate Off/Automatic/Manual
Auto Opt. Off/On
Opt. Beep Off/On
APW Auto Save Off/On
Internal Resolution Off/On
Reference Size
10
PAGE 15 OF 101
APPLICATIONS CONTINUED
APPLICATION SETUP
The Application can be customized for various user
preferences.
1.
Figure 48
2. Select the list item
Figure 49
3. To return to the Application home screen, press the
Figure 50
DESCRIPTION
Off: Auto tare is turned off.
On: The first stable weight (>=5d) will be tared as a container automatically.
Off: The icon "Σ" does not display.
Manual: The softkey "Σ" displays. User can press the key to accumulate the stable weight.
Automatic: The icon "Σ" displays. The weight will be accumulated automatically.
NOTE: The load to be accumulated has to be >= 5d. The next
accumulation can only start once the pan is cleared.
When LFT is ON (no such limit when LFT is OFF or the approved mode is OIML),
a. Gross weight and net weight cannot be accumulated;
b. Gross 0 has to be reached before a new sample accumulation.
When LFT is OFF,
a. Gross weight and net weight can be accumulated;
b. A new sample can be accumulated after reaching gross 0 or net 0.
Off: Auto Opt. is off.
On: The APW will be optimized automatically during count weighing.
Off: Opt. Beep is off.
On: When the APW has to be optimized, the beeper will beep once.
Off: APW Auto Save is off.
On: If the APW is derived from sampling, and a counting library is selected, the new APW
will be saved to library after optimized.
NOTE: It will be hidden when "Auto Opt." is off.
Off: Internal Resolution is off.
On: During sampling or weighing, the internal resolution will be used.
The One Button Sampling PCS is from 0 to 999 the default is 10.
0: The One Button Sampling key will be hidden.
Press the softkey
corresponding to the
icon to enter
Configuration. The
Configuration screen
is now displayed.
(See Figure 51)
and press the softkey
corresponding to the
icon to change the
setting as desired.
(See Figure 52)
button corresponding to the
Figure 51
Figure 52
icon.
0621 IH-8105