Readout Menu; Zero Range - Uline OHAUS DEFENDER 5000 Manual Del Usuario

NOTE: If the Security Switch is set to ON, the
Capacity Unit, Range, Capacity, Graduation
and Power On Zero settings are not reset.

READOUT MENU

Enter this menu to customize display functionality.
NOTE: Default settings are in bold.
READOUT OPTIONS
Stability 0.5d, 1d, 2d, 5d

Zero Range

+/-2%, +/-100%
Filter Level Low, Medium, High
Off, 0.5d, 1d, 3d
Auto Zero Track
Backlight Off, 1min, 2min, 5min, 10min, Always On
Screensaver Off, 5min, 10min, 30min
Auto Off Off, 5min, 10min, 30min
Adjust Contrast 1, 2, 3, 4, 5
Reset
STABILITY
Set the amount the reading can vary before the stability
symbol turns off.
0.5d = 0.5 scale division
= 1 scale division
1d
2d = 2 scale divisions
5d = 5 scale divisions
ZERO RANGE
Set the percentage of scale capacity to be zeroed.
2%
100%
NOTE: The setting is forced and locked to 2%
when security switch is set to the locked position.
FILTER LEVEL
Set the amount of signal filtering.
Low = faster stabilization time with less
stability
Medium = normal stabilization time
with normal stability
High = slower stabilization time with
more stability
PAGE 9 OF 101
OPERATION CONTINUED
AUTO ZERO TRACKING
Set the automatic zero tracking functionality.
AUTO DIM
Set the display backlight functionality.
Settings:
SCREENSAVER
Set whether the screensaver is enabled after the
selected time period.
AUTO OFF
Set whether the display enters sleep mode after the
selected time period.
OFF = Disabled.
0.5 division = Display will maintain zero until
a change of 0.5 divisions per
second is exceeded.
1d = Display will maintain zero until
a change of one division per
second is exceeded.
3d = Display will maintain zero until
a change of three divisions per
second is exceeded.
1 min = Backlight turns off after one
minute of inactivity.
2 min = Backlight turns off after two
minutes of inactivity.
5 min = Backlight turns off after five
minutes of inactivity.
10 min = Backlight turns off after 10
minutes of inactivity.
Always on
Off
Off = Disabled.
5 min = Screensaver is enabled after
five minutes.
10 min = Screensaver is enabled after
10 minutes.
30 min = Screensaver is enabled after
30 minutes.
Off = Disabled.
5 min = Display enters sleep mode after
five minutes.
10 min = Display enters sleep mode after
10 minutes.
30 min = Display enters sleep mode after
30 minutes.
0621 IH-8105