Input/Output (I/O) Setup - Uline OHAUS DEFENDER 5000 Manual Del Usuario

AUTO TARE
Set the automatic tare.
Off: Auto tare is
turned off.
(See Figure 28)
On: The first stable weight (>=5d) will be tared as
a container automatically.
NOTE: If the security switch is set to ON, Auto
Tare is locked at the current setting.
ACCUMULATION
To start Accumulate
weighing data, place
the object on the pan
and press the softkey
corresponding to the
icon. The accumulation
icon will start blinking. The load to be accumulated has
to be >= 10d. The next accumulation can only start
once pan has been cleared. (See Figure 29)
When LFT is on (no such
limitation when LFT is off
or LFT is on and the
approved mode is OIML),
(See Figure 30)
a. Gross weight
and Net weight
cannot be
accumulated
at the same
time – only Gross
Weight or Net Weight can be accumulated.
(See Figure 31)
b. After a weighing, the gross weight on the pan
has to reach zero before a new sample can be
accumulated.
NOTE: The accumulation icon
shown if Accumulate is set to Manual and
Automatic. See Application Setup in previous
section.
PAGE 13 OF 101
APPLICATIONS CONTINUED
Viewing the Accumulation Results
1. To view accumulation
Figure 28
2. To clear accumulation
3. When the message
Figure 29
4. To return to home screen, press the softkey
5. Press the Print button to print Accumulation result.
ID INPUT
1.
Figure 30
2. User can press
Figure 31

INPUT/OUTPUT (I/O) SETUP

The I/O setup can be customized for various
user preferences. The I/O setup is defined below.
is only
results, press the
softkey corresponding
to the icon. The
Accumulate Result
screen is displayed. (See Figure 32)
results, press the
button. (See Figure 33)
"Clear the statistical
data?" appears,
press the softkey
corresponding to the
icon. (See Figure 34)
corresponding to the
Press softkey
corresponding to
the icon to enter
configuration screen.
(See Figure 35)
alphanumeric keys to
input the ID number.
Then press the softkey
corresponding to the
icon to confirm the input. (See Figure 36)
NOTE: Default settings are in bold.
ITEM AVAILABLE SETTINGS
Enable On, Off
Discrete Input 1 Off, Zero, Tare, Clear Tare, Print, Unit, Accumulate
Discrete Input 2 Off, Zero, Tare, Clear Tare, Print, Unit, Accumulate
Discrete Output 1 Off, Overload, Underload
Discrete Output 2 Off, Overload, Underload
Discrete Output 3 Off, Overload, Underload
Discrete Output 4 Off, Overload, Underload
Figure 32
Figure 33
Figure 34
icon.
Figure 35
Figure 36
0621 IH-8105