Setting The Cooking Time; Activates/Deactivates The Temperature Holding (Melting) Function - Angelo Po 091FR1ID Manual De Uso Y Instalación

SETTING THE COOKING TIME

Manual cooking
Proceed as follows.
1 - Press the key (D) the last value set appears on
the display (A).
2 - Press the keys (F-G) to increase or decrease
the values shown on the display.
The cooking time increases or decreases by 30
seconds each time one of the keys (F-G) is
pressed.
ACTIVATES/DEACTIVATES THE TEMPERATURE HOLDING
(MELTING) FUNCTION
Proceed as follows.
1 - Press key (E) to activate the temperature hold-
ing (melting) function.
The light (Q) comes on.
2 - Press key (E) to deactivate the temperature
holding (melting) function.
The light (Q) goes out.
3 - Press the key (D) again to start the cooking cy-
cle.
If the (D) key is pressed after the cooking cycle
is started, the display shows the cooking time
set for 4 seconds.
A
F G
D
Important
The temperature holding function is always
activated whenever a heating operation is
started with the real temperature in the well
below 90°C.
Q E
- 11 -
IDM-39619400600E.tif
IT
GB
DE
FR
ES
IDM-39619400600D.tif
English