Commissioning And Use Of The Equipment - Dalla Corte DC PRO XT Manual Del Usuario

4. Commissioning and use
of the equipment
Carry out the following instructions with the help of the diagram shown in
Fig.1.
• Open the water supply tap (1 Fig.1).
• Turn on the electrical power switch (7 Fig.1) and turn the machine's main
switch clockwise (1 Fig.2); then verify that the display lights up.
brew group as well as the other parameters in the "Group Display" explained
in paragraph 6.
70 |
Tue 28 Aug 2018
Info Settings Cleaning Groups
• As soon as the machine is switched
on, the autofill function begins to fill
10:51
the boiler until the working level is
reached.
• Once the filling phase is comple-
te, the activated brew groups begin
to heat up, the values shown on the
display of each group start to flash.
• At the end of the heating phase the
values displayed on the display of
each group stop flashing, displaying
the temperature value set for each