Manuale Utente Palmare Idro Touch Radio - Ravelli Mia 90 Manual De Uso Y Mantenimiento

Settings > Adjust
Settings > Language
The adjust function allows to modify the value read by the room probe inside the handheld computer, increasing or decreasing it by
To access the next setting, follow the steps given above or simply remove and replace the batteries.
the set value (offset).
The device resets and prompts you again to select the language you want to set.
Make this adjustment carefully and only after having checked deviations from the actual room temperature with a reliable instrument!
Settings > Adjust
SETTING
DATE-TIME
ENABLE EXT. T
SEASON
DATE - HOUR
CONTRAST
ENABLE T.EXT
FW VERSION
CONTRAST
LANGUAGE
VERSION FW ADJUST
Press the key LANGUAGE
"confirm" to
access the
SETUP
SETTINGS
Use the UP/DOWN keys to change the value read by the
UP" and "DOWN" buttons The value can vary from
room temperature probe installed inside the handheld
-10°C to 10°C. The standard value is 0°C.
set, with respect to a reference value.
The value can vary from -10°C to 10°C.
The standard value is 0°C.
Settings > Language
To access the next setting, follow the steps given above or simply remove and replace the batteries.
VENTILATION menu (function only for models in which the same is specified in the dedicate user's manual)
The device resets and prompts you again to select the language you want to set.
The stoves equipped with ventilation system can heat the area in which are installed through the heat generated by the window and
the room temperature fan installed inside them.
Below are the messages shown on display when the stove is equipped with ventilation system.
The temperature read by the handheld unit controls the modulation of the stove. If you want to adjust the ventilation by
adjusting the stove, set the fan to A mode as shown in the relative chapter.
Press the key
"access menu" to
access the
MENU page
To exit the page and return to Stand-by page, press the button repeatedly.
Control: ventilation can be set from 0 to AUTO where 0 indicates that the same is disabled, setting from MIN to MAX enables selecting
the heat distribution speed. If set to AUTO, the ventilation follows the power set on the stove.
Chrono function
By enabling the chrono function, it is possible to control the ventilation speed for each program as shown in the logic above.
MENU
USER
MANUFACTURER'S
TECHNICIAN
Press the key
"access menu" to
access the
MENU page
Use and maintenance manual Mia 90

Manuale utente PALMARE IDRO TOUCH RADIO

ADJUST
Press the key
"selection" to switch
to the function
VERSION FW.
MENU
USER
MANUFACTURER'S
TECHNICIAN
VENTILATION POW.
Press the key
"confirm"
to access the
USER page
SETTING
DATE-TIME
ENABLE EXT. T
DATE - HOUR
SEASON
ENABLE T.EXT
CONTRAST
CONTRAST
FW VERSION
VERSION FW
LANGUAGE
ADJUST ADJUST
LANGUAGE
to access the function
By pressing the following key you will confirm of data
Pressing the following key allows you to confirm the
and switch to the page within SETTINGS menu
data and move to the screen within the SETTINGS
menu.
USER
POWER SETTING
CHRONOTHERMOSTAT
SCREW LOADING
SET AIR-PELLET
Press the key
"confirm"
to access the
USER page
Press the increase/decrease keys
"increase/decrease"
to change the ventilation.
USER
POWER SETTING
CHRONOTHERMOSTAT
SCREW LOADING
SET AIR-PELLET
CRONO-THERMOSTAT.
Rev.2 03/03/2021
Vers. 01 del 07/04/15
Pag.32
ADJUST
Press the key
"confirm"
Press the key
"confirm"
to quickly switch to
VENTILATION.
USER
POWER SETTING
CHRONOTHERMOSTAT
SCREW LOADING
SET AIR-PELLET
Press the key
several times
to quickly switch to
Pag.43