Ravelli Mia 90 Manual De Uso Y Mantenimiento página 161

Stove State
Below are given the steps for accessing the relative menu starting from Stand-By mode.
MENU
MENU
USER
MANUFACTURER'S
TECHNICIAN
TECHNICIAN
PRODUCER
Press the key
"access menu" to
access the
MENU page
STOVE STATE
ACTIVE PARTS
ACTUAL STATES
STATE TEMPERATURE
H20 TEMPERATURE
Use the UP and DOWN
keys to change the % pellet
value.
To exit the screen and return to the home screen, press the key repeatedly.
PUMP
3-WAY VALVE HEAT
PRESSURE 1.1 BAR
Stove status
Stove State
Below are given the steps for accessing the relative menu starting from "Home" mode.
SHUTDOWN
Below are given the steps for accessing the relative menu starting from Stand-By mode.
In this mode you can check the proper operation of the most important parameters of the appliance. Here is a list of real data of the
stove useful for service during inspection.
MANUFACTURER'S
- Circulator state (ON running)
TECHNICIAN
TECHNICIAN
- Position of 3-way valve DHW (domestic hot water) or HEAT (heating);
PRODUCER
- System pressure;
- Stove state;
Press the key
"access menu" to
access the
MENU page
- Temperature read by the handheld unit;
- External thermostat (request ON);
- Flame temperature (combustion chamber);
STOVE STATE
- Combustion fume exhaust temperature;
ACTIVE PARTS
- Inlet flow meter temperature;
- Heated flow meter temp.;
ACTUAL STATES
- Electronic board temperature;
STATE TEMPERATURE
H20 TEMPERATURE
To exit the STOVE STATE page and return to Stand-by page, press the button repeatedly.
In this mode you can check the proper operation of the most important parameters of the appliance. Here is a list of real data of the
stove useful for service during inspection.
Settings
RPM: fume extractor operating speed;
Below are given the steps for accessing the relative menu starting from Stand-By mode.
T: temperature of the combustion chamber;
PUMP
Tj: oven temperature, visible only in HEATING mode (in COOKING mode it is directly visible on the home page;
MENU
3-WAY VALVE HEAT
T SK: electronic board temperature;
State of the cooker (WORK, FINAL CLEANING, OFF, etc.).
PRESSURE 1.1 BAR
USER
MANUFACTURER'S
SHUTDOWN
TECHNICIAN
To exit the STOVE STATUS screen and return to the Home screen, press the key repeatedly.
In this mode you can check the proper operation of the most important parameters of the appliance. Here is a list of real data of the
Press the key
stove useful for service during inspection.
"access menu" to
access the
MENU page
- Circulator state (ON running)
After following the procedure above step by step, you can set the following functions:
- Position of 3-way valve DHW (domestic hot water) or HEAT (heating);
- System pressure;
- Stove state;
- Temperature read by the handheld unit;
- External thermostat (request ON);
- Flame temperature (combustion chamber);
- Combustion fume exhaust temperature;
Manuale utente PALMARE IDRO TOUCH RADIO
Use and maintenance manual Mia 90
Stove State
Below are given the steps for accessing the relative menu starting from Stand-By mode.
USER
Press the key Press the key
"access menu" to "confirm"
access the
to access the
MENU page
USER page
STOVE STATE
STOVE STATE
ACTIVE PARTS
ACTIVE PARTS
% Flow
ACTUAL STATES
ACTUAL STATES
STATE TEMPERATURE
STATE TEMPERATURE
H20 TEMPERATURE
H20 TEMPERATURE
Press the CONFIRM button
to confirm the value and
go to the item % change
flow.
POWER MOD PUMP
Manuale utente PALMARE IDRO TOUCH RADIO
3-WAY VALVE HEAT
PRESSURE 1.1 BAR
SHUTDOWN
In this mode you can check the proper operation of the most important parameters of the appliance. Here
MENU MENU
stove useful for service during inspection.
USER
USER
- Circulator state (ON running)
- Position of 3-way valve DHW (domestic hot water) or HEAT (heating);
- System pressure;
- Stove state;
Press the key
"confirm"
to access the
USER page
- Temperature read by the handheld unit;
- External thermostat (request ON);
- Flame temperature (combustion chamber);
STOVE STATE
- Combustion fume exhaust temperature;
- Inlet flow meter temperature;
ACTIVE PARTS
- Heated flow meter temp.;
ACTUAL STATES
- Electronic board temperature;
STATE TEMPERATURE
H20 TEMPERATURE
To exit the STOVE STATE page and return to Stand-by page, press the button repeatedly.
Settings
Below are given the steps for accessing the relative menu starting from Stand-By mode.
POWER MOD
Press the key
Press the key
"access menu" to
"confirm"
access the to access the
MENU page USER page
After following the procedure above step by step, you can set the following functions:
Manuale utente PALMARE IDRO TOUCH RADIO
USER
MENU
USER
POWER SETTING
USER
LOADING AUGER
CHRONOTHERMOSTAT
MANUFACTURER'S
CHRONOTHERMOSTAT
SCREW LOADING
TECHNICIAN
SET AIR-PELLET
SET AIR-PELLET
STOVE STATUS
STOVE STATE
STOVE STATE
ACTIVE PARTS
% Flow
ACTUAL STATES
ACTUAL STATES
STATE TEMPERATURE
STATE TEMPERATURE
H20 TEMPERATURE
v
Use the UP and DOWN buttons to change the
pellet % value. Press the CONFIRM button to
HH T ...
POWER MOD
EXT.T ...
FLAME T 340°C
FUME T 120°C
F. EX. T 30°C
C. EX. T 55°C
EL B. T---25°C
USER
USER
POWER SETTING
LOADING AUGER
CHRONOTHERMOSTAT
CHRONOTHERMOSTAT
- Current boiler power;
SCREW LOADING
SET AIR-PELLET
- Flow read by the flow meter;
SET AIR-PELLET
STOVE STATUS
- Fume extractor speed;
- Actual flow set;
- Boiler water temperature (SUPPLY);
- Boiler water temperature (optional) - RETURN from the system;
- Boiler DHW temperature;
STOVE STATE
- Puffer temperature - average warm point;
- Puffer temperature second reading (low temp.).
ACTIVE PARTS
ACTUAL STATES
STATE TEMPERATURE
HH T ...
EXT.T ...
MENU
USER
FLAME T 340°C
FUME T 120°C
POWER SETTING
USER
F. EX. T 30°C
CHRONOTHERMOSTAT C. EX. T
MANUFACTURER'S
EL B. T---25°C
SCREW LOADING
TECHNICIAN
SET AIR-PELLET
- Current boiler power;
- Flow read by the flow meter;
- Fume extractor speed;
- Actual flow set;
- Boiler water temperature (SUPPLY);
- Boiler water temperature (optional) - RETURN from the system;
- Boiler DHW temperature;
- Puffer temperature - average warm point;
USER
USER
LOADING AUGER
POWER SETTING
STOVE STATE
CHRONOTHERMOSTAT
CHRONOTHERMOSTAT
COMFROT CLIMA
SET AIR-PELLET
SCREW LOADING
SET AIR-PELLET
STOVE STATUS
Press the key Press the selection
Press the key
"confirm" keys to navigate the
several times
to access the
menu screens.
to quickly switch to
USER page USER.
Stove STATUS.
STOVE STATE
ACTIVE PARTS
ACTIVE PARTS
ACTUAL STATES
STATE TEMPERATURE
H20 TEMPERATURE
confirm the value and
change to the item % flow.
T. CALDERA
T.PUFFER H
T.PUFFER L
LOADING AUGER
CHRONOTHERMOSTAT
- Current boiler power;
- Flow read by the flow meter;
- Fume extractor speed;
- Actual flow set;
Press the key
several times
to quickly switch to
Stove STATUS.
- Boiler water temperature (SUPPLY);
- Boiler water temperature (optional) - RE
- Boiler DHW temperature;
- Puffer temperature - average warm po
- Puffer temperature second reading (low
v
USER
T. CALDERA
POWER SETTING
STOVE STATE
T.PUFFER H
CHRONOTHERMOSTAT
55°C COMFROT CLIMA
T.PUFFER L
SCREW LOADING
SET AIR-PELLET
Press the key
Press the key
"confirm"
"selection" to switch to
to access the
second menu page
USER page
to the function
SETTINGS.
Vers. 01 del 07/04/15
Rev.2 03/03/2021
Pag.30
Pag.40
USER
SETTING
Press the key
Select SET AIR-PELLET
several times
and press the CONFIRM
to quickly switch to
button.
Stove STATUS.
STOVE STATE
ACTIVE PARTS
ACTUAL STATES
STATE TEMPERATURE
v
HH T ...
EXT.T ...
Vers. 01 del 07/04/15
FLAME T 340°C
Pag.30
FUME T 120°C
F. EX. T 30°C
C. EX. T 55°C
EL B. T---25°C
USER
USER
STOVE STATE
COMFROT CLIMA
SET AIR-PELLET
SETTING
STOVE STATUS
STOVE STATE
ACTIVE PARTS
ACTUAL STATES
STATE TEMPERATURE
H20 TEMPERATURE
USER
SETTING
Press the key
"selection" to switch to
second menu page
to the function
SETTINGS.