Publicidad
1
Install lock chassis.
DO NOT FULLY TIGHTEN
CHASSIS MOUNTING SCREWS.
2
Prepare the indicator side of the door.
2a
Use template to mark and drill four (4) pilot holes.
Required for indicator side of door ONLY!
a.
Template
2
b.
Use level to align
template with door edge.
STEP 3 for OUTSIDE NON-INDICATOR ONLY.
For OUTSIDE INDICATOR, skip to STEP 4.
3
Install outside cylinder.
3a
Insert key halfway into the cylinder.
Exterior
3b
Rotate cylinder clockwise.
For INSIDE INDICATOR trim, skip to STEP 6.
Key inserted
halfway
Publicidad
