Publicidad
4
For outside indicator only – Install outside cylinder.
A. Trim the cam spindle if necessary.
Break the spindle at the appropriate mark according to door
thickness. (If necessary, remove clip.)
2" 1C\v"
1C\,"
B. IMPORTANT! Check indicator handing with indicator
positioned against top rim of reinforcement plate.
OUTSIDE
INDICATOR
Deadbolt functions
If necessary to change indicator handing, refer to steps on
page 7.
LH/LR
RH/RR
4a
Unlock the door.
4b
Install the indicator assembly.
DO NOT use power screwdriver.
DO NOT overtighten.
Exterior
4c
Install the indicator faceplate and cylinder with spring.
4d
Rotate cylinder clockwise.
Indicator
faceplate
Key inserted
halfway
3
Publicidad
