Publicidad
5
Install inside cylinder or thumb turn.
Cylinder Functions
5a
Insert key halfway into the cylinder, and install the
cylinder with ring and cylinder spring as shown.
5b
Rotate cylinder clockwise.
4
STEP 5 for NON-INDICATOR INSIDE TRIM ONLY.
For INDICATOR TRIM, skip to STEP 6.
Interior
Thumb Turn Functions
5a
Use template to mark and drill two (2) pilot holes.
Interior
5b
Install the thumb turn.
Thumbturn
vertical
If both inside and outside of lock are now installed, skip to step 7.
Use level to
align template
with door edge.
Rotate 90°
Extend
deadbolt
Publicidad
