Publicidad
6
For Inside Indicator Trim ONLY – Install inside indicator.
A. Trim the cam spindle if necessary (cylinder functions).
Break the spindle at the appropriate mark according to door
thickness. (If necessary, remove clip.)
2" 1C\v"
1C\,"
B. IMPORTANT! Check indicator handing with indicator
positioned against top rim of reinforcement plate.
INSIDE
INDICATOR
Deadbolt functions
If necessary to change indicator handing, refer to steps on
page 7.
RH/RR
LH/LR
Cylinder Functions with Indicator
6a
Unlock the door.
6b
Install the indicator assembly.
DO NOT use power screwdriver.
DO NOT overtighten.
6c
Install the indicator faceplate and cylinder with spring.
Indicator
faceplate
Key inserted
halfway
6d
Rotate cylinder clockwise.
L Additional inside indicator function shown on the following
page.
Interior
5
Publicidad
