Xylem Lowara GRUPPOSFERA Instrucciones Para La Instalación Y El Uso página 6

en
WARNINGS FOR THE SAFETY OF PEOPLE AND PROPERTY
Meaning of the symbols used in this manual
ATTENTION
1. General
2. Preliminary inspection
Upon delivery check the integrity of the packaging.
After unpacking the pump make sure that no damage has occurred during transportation.
Should the pump be damaged, please inform our agent within 8 days from the delivery date.
3. Applications
See the pump handbook.
4. Working limits
ATTENTION
5. Installation
5.1 Handling
The product must be handled with care, using suitable hoisting equipment; accidents and impacts can cause damage
without any visible external signs.
Screw the pump to a stable base using the slots in the feet of the tank.
See instructions in the pump's installation-use-safety handbook.
DANGER
Failure to observe this warning may cause personal injury
ELECTRIC SHOCK
Failure to observe this warning may result in electric shock
ATTENTION
Failure to observe this warning may cause damage to property (pump, system, panel,....)
or to the environment
Read the manual carefully before proceeding
Specific information for personnel in charge of installing the product in the system
(plumbing and/or electrical aspects) or in charge of maintenance
Specific information for users of the product
The purpose of this manual is to provide the necessary information for the installation,
use and maintenance of the pumps.
The user should read this manual before using the pump.
Improper use could damage the machine and cause the forfeiture of the warranty
coverage.
When asking our sales and after-sales services for technical information or spare parts,
please indicate the model identification and construction numbers.
The following instructions and warnings refer to the standard model; for any variations or
characteristics of the special versions please refer to the sales contract.
For any instructions or situations not referred to in this manual or in the sales
documentation, please contact our sales service.
The pump is not suitable for dangerous or flammable liquids.
Maximum temperature of pumped liquid:
• BGM, PM: +40°C
• CEAM, CAM, HM: +50°C
Maximum working pressure:
• sphere units: : 500 kPa (= 5 bar)
• block units: : 800 kPa (= 8 bar)
See pump limits in the handbook.
« Translation of the original instructions »
6