Light Bulbs - Broan Best PIK33 Manual De Instrucciones

19. LIGHT BULBS

This insert uses 50W halogen lamps. (120V, 50W, PAR 20)
(Purchase separately)
1. Install the lamps by rotating them clockwise into their socket holder.
2. Install chrome rings by pushing upward until they snap in place.
20. INSTALL BAFFLE FILTERS
Remove protective plastic film covering the baffle filters before installing them.
It is recommended to install side filters first and finish with center
one(s).
NOTE: For PIK45 model, side filters are smaller than center ones.
A vertical arrow with the word AIR can be found on the filters
border. Make sure to install the baffle filters with the arrow pointing
towards the inside of the hood insert. See figure beside.
1. Insert upper end of baffle filter into the insert.
2. Raise lower end of baffle filter to position inside of unit and
push to insert the rear clip inside its slot in baffle back side.
3. While pushing the baffle filter, slide it under the inner retaining
piece.
Make sure the baffle filters are positioned as shown beside in
order to allow the grease to reach the grease rail easily.
21. USE AND CARE
Baffle filters and impeller(s).
The baffle filters, impeller(s) and grease rail should be cleaned frequently. Use a warm detergent
solution. Baffle filters and impeller(s) are dishwasher safe.
Remove baffle filters by pushing them towards the back of hood and rotating downward.
Stainless steel cleaning: How to maintain its « BRIGHT LOOK »
Do:
- Regularly wash surfaces with clean cloth or rag soaked with warm water and mild soap or liquid dish detergent.
- Always clean in the direction of original polish lines.
- Always rinse well with clear water (2 or 3 times) after cleaning. Wipe dry completely.
- You may also use a specialized household stainless steel cleaner.
Don't:
- Do not use any steel or stainless steel wool or any other scrapers to remove stubborn dirt.
- Do not use any harsh or abrasive cleansers.
CAUTION
HD0090
- 11 -
HD0078
HO0014
1
2
3