Publicidad
PH10 PLUS installation and user's guide
http://www.renishaw.com
PH10 compatible probes
M8 touch-trigger probes
This range of probes utilises the M8 bush for mounting to the head. These can be fitted directly onto the PH10T PLUS head, but when
used with the PH10M PLUS or PH10MQ PLUS heads, one of the autojoint to M8 bush extension bars of the PAA1 adaptor must be used.
Probe
Diameter
Application
TP2-5W
13 mm
Universal probe for DCC and manual CMMs
TP6*
25 mm
Universal probe for DCC and manual CMMs
TP20
13.2 mm
Universal probe for DCC and manual CMMs with module changing
TP200
13.5 mm
Universal probe with strain gauge for DCC CMM - 100 mm max stylus length
* An autojoint version (TP6A) is also available
Multiwire (autojoint) probes
This range of probes is compatible with the PH10M PLUS and PH10MQ PLUS heads only and utilise the Renishaw multiwired autojoint
connection to the head.
Probe
Diameter
Application
SP25M
25 mm
High speed scanning probe
TP7M
25 mm
Universal probe with strain gauge for DCC CMMs
SP600M*
50 mm
Analogue contact scanning probe
Probes in this range require comprehensive integration with your CMM.
* When using PH10MQ PLUS with SP600M, a PEM25 extension bar is required to achieve A = 97.5° or A = 105° in all Baxis positions.
Issued 01 2013
Page 17 of 48
Weight
User's guide
65 g (body)
H-1000-5104
35 g (SM25-1)
40 g (SM25-2)
49 g (SM25-3)
40 g (TM25-20)
85 g (without stylus)
H-1000-2010
216 g (without stylus)
H-1000-5175
User's guide
H-1000-5021
H-1000-5008
H-1000-5021
H-1000-5014
Publicidad
