Publicidad
PH10 PLUS installation and user's guide
http://www.renishaw.com
Specification
Repeatability of position (at a distance of 62 mm)
Accuracy of step spacing from theoretical position
Positioning
Probe mounting
Dimensions from quill face
Weight
The operating voltages of the unit are as follows:
100 V to 240 Vac +10%, -15% 47 Hz to 66 Hz 30 W maximum
Environmental conditions
The following environmental conditions comply with those defined in BS EN61010 - 1:2001:
Indoor use
Altitude
Operating temperature
Storage temperature
Relative humidity
Pollution degree
PH10T PLUS
PH10M PLUS
PH10MQ PLUS
PH10T PLUS
PH10M PLUS
PH10MQ PLUS
Step
Aaxis 0° to 105°
Baxis 180° to +180°
Total
PH10T PLUS
PH10M PLUS
PH10MQ PLUS
XY (all)
Z (PH10T PLUS)
Z (PH10M PLUS)
Z (PH10MQ PLUS)
PH10T PLUS
PH10M PLUS
PH10MQ PLUS
IP30 (no protection against liquids)
Up to 2000 m
0 °C to +50 °C
10 °C to +70 °C
80% maximum for temperatures up to +31 °C
2
Issued 01 2013
Page 25 of 48
<0.4 μm TP20 and stylus
<0.4 μm TP6A and stylus
<0.4 μm TP6A and stylus
±0.24 mm TP6 probe and stylus
±0.3 mm TP6A probe and stylus
±0.3 mm TP6A probe and stylus
7.5°
15 positions
48 positions
720 positions
M8 thread, 18 mm diameter bush face
Multiwired autojoint
Multiwired autojoint
62 mm
102 mm
117 mm
73 mm
595 g
620 g
730 g
Publicidad
