Publicidad
PH10 PLUS installation and user's guide
http://www.renishaw.com
HCU1 hand control unit
The HCU1 hand control unit is an optional control which enables the PH10 PLUS system to be used in manual mode or in a teach cycle. A
LCD dot matrix display provides information on system status.
See the HCU1 user's guide (part number H-1000-5016) for further information on the features and operation of the unit, or contact your
Renishaw representative for advice.
Issued 01 2013
Page 21 of 48
Publicidad
