MS Schippers SmartScan Manual Del Usuario página 2

Wireless Vet Ultrasonic System
SmartScan
Quick Start Guide
SmartScan comes in the following difference versions:
(1) high version A
(2) standard version B
(3) basic version C
Version A is with RFID for both FDX and HDX.
1. Appearance
EN - Quickstart
2. Connection of Host and tablet
2.1 Turn on tablet and read the manual of SmartScan
2.2 Press down and hold the Main Key for 7
seconds until the indicator turns blue to power on the
machine.
The indicator will then flicker at a slow
rate. Immediately the SmartScan will
search for a matching WIFI signal
pathway automatically .
2.3 Touch the icon of SmartScan APP on the sceen to have
the ultrasound interface on.
2.4 Successful Connection
---- When "Connected" appears on the bottom of the operating
interface, it means that the smart device has been connected
with SmartScan.
---- Press the Main Key to enterthe real-time ultrasound scanning
mode.
Schippers Europe BV
Rond Deel 12
5531 AH Bladel, Nederland
Phone: +31497382017
Fax: +31497382096
E-mail: contact.nl@schippers.eu 2
Website: http://www.schippers.eu