MS Schippers SmartScan Manual Del Usuario página 4

4.1，by mannual
a. Freeze the satisfied echo image first.
b. Press the Save Key and the "Report" page will pop up on
the screen:
c. Click on the red blank ID space and a digit keyboard will
appear at the bottom of the screen. Enter the corresponding ear
mark and press "Next" (Blue Key) after confirmation.
d. PT Result
Tap the optional box. Check the Pregnant box if the animal is
pregnant. Leave the boxes blank if the animal is not pregnant.
EN - Quickstart
e. Remarks
--- Other information regarding to the animal or the image can be
entered in the Remarks column. Enter words or sentences in English.
--- The Remarks column can be blank.
--- Press OK when all the information is entered.
f. Check the report information and press the Ok key on the
report page.
--- The report will then be saved in the smart device. Press the
Cancel key to not save the report.
--- The path for saved Report: local RAM
directory\MYJC\report\report_2017_05_23 09-23.pdf
--- The report files are named as:
record_Year/Month/Date_Hour/Minute.pdf
4.2 by readinng ear-tag (RFID)
SmartScan in Verions A can read the ear-tag by switching on the
sub-key RFID instead of manual entry.
A. View the images scanned in real-time and freeze the
satisfactory one.
B. Activate the Sub-Key and put the rear protecting part of the
device close to the electronic ear tag worn by the animal.
---- Once the ear-tag is read, a beep from the SmartScan
will be heard and the ear-tag number will be instantly
displayedin the ID area on the left upper corner of the
screen.
---- The ear-tag must be read within 10 seconds after Sub-Key
is activated.\
---- The ear-tag can be automatically read as shown below:
C. PT Result
D. Remark s
E. Check the report information
(Complete Step 3 to 5 as instructed in by Manual)
4.3 by scanning barcode and QR
Barcodes in the following two formats can be scanned by
SmartScan:
How to Scan:
Tap the Camera icon and the tablet PC will automatically start the
scan process; point the scanner of the smart device at the barcode
and QR code to be scanned. A beep from the smart device within
1 to 3 seconds indicates a successful scan.
5. Backfat Measurement
The SmartScan can automatically identify and measure BF and
save the measurement results in the database.
If your machine is Version A and B, this function is available.
1) Press the PT/BF key to switch system to BF mode. The
characters BF will be display on the right upper corner of the
screen in steady of PT.
2) Place the probe on P2 point of the animal.
Obtain a correct ultrasound image and then freeze it.
Schippers Europe BV
Rond Deel 12
5531 AH Bladel, Nederland
Phone: +31497382017
Fax: +31497382096
E-mail: contact.nl@schippers.eu
Website: http://www.schippers.eu
4