Cleaning And Disinfection - MS Schippers SmartScan Manual Del Usuario

Clean and dry the product and put it back into the original package when not inuse for a long period

of time.
Properly store the product in the warehouse and comply with the storage requirements of the product.

Warning:
■ The probe and the oiler are applicable to this product only. All consequences arising from unauthorized
replacement will be borne by the user.
■ The IPX7waterproof housing of this product is one piece molded. Please contact SONOWIN for repair
or replacement of any damaged part. Users shouldnever repair it by themselves.

7.2 Cleaning and Disinfection

The probe should be cleaned after each use and disinfected when necessary.

With an IPX7 waterproofing rating, this product can be washed in water, but attention should be paid

to the following:
■ Turn off the power.
■ Check whether the waterproof rubber cap of the battery port is properly closed.
■ Wash the product with your hands or a towel.
■ Do not clean, scrub or scratch it with hard objects or steel brushes.
If disinfection is needed, wipe it with a cotton ball or a piece of soft cloth dipped in alcohol.

Never clean this product with chemical liquids.

EN - MS Smartscan Manual
33
66