Smart Deviceinterface - MS Schippers SmartScan Manual Del Usuario

RFID
Sub-Key

2.1.2 Smart DeviceInterface

Icons
Freeze
PT/BF
Setting
Load Image
Save Image
EN - MS Smartscan Manual
This key is available for the premium version A only.
Notes: It is available tobe used when the image is frozen only.
RFID
--- To freeze the image before pressing this key. Then, to have the rear part of the device
close to the ear-tag to read out its number within 10 seconds. The reading distance is
On/Off
around 6-10 cm.
Description
Tap the icon Freeze during the real-time scan to freeze the image, tap it again to unfreeze the image.
(The main Key of SmartScan also has the same function)
PT is short for Pregnancy Test . BF is for Backfat measurement.
SmartScan comes three versions in all. Both the premium version A and standard versuin B have this key.
The power-on default setting is PT mode which can be seen inthe upper right corner. Press it to switch to
BF mode which can be seen inthe upper right corner.
Tap this icon and two settings will pop up:
(1) Left/Right Hand Setting (The default setting is Left Hand);
(2) Screensaver Time Setting (1-20 seconds available to choose from).
Tap this icon to load the saved images.
Tap this icon to save the frozen image on the smart device.
12
12
45