Important; Save The Result Of Backfat Measurement - MS Schippers SmartScan Manual Del Usuario

Meanwhile, the value of BF thickness will be immediately displayed on the left of the screen in the
following format:

Important:

High configuration and standard configuration models can automatically identify BF on PT mode, but
the data measured on BF mode is most accurate.
The BF data measured on PT mode may have a deviation of 3 to 5mm.

4.2 Save the result of backfat measurement

The measurement result of BF will be saved in the datas of the system automatically when its number appeared
on the screen.
Save path: RAM directory\MYJC\report\
Save format: excel.pdf
Name: report
How to transfer the datas?
Please reference Chapter 5 below.
EN - MS Smartscan Manual
BF:18.5mm
28
28
Green line for
Measureing the backfat
thickless
61