Connection With Smart Device; Get An Installation-Compatible Smart Device - MS Schippers SmartScan Manual Del Usuario

Save Video
Cine Loop
Cine-loop Bar
Battery Power
Current Mode
Date/Time
Gain
Depth
ID

2.2 Connection with Smart Device

2.2.1

Get an Installation-Compatible Smart Device

---- If a tablet PC is purchased with SmartScan together, it will have been installed with the SmartScan App;
---- If a tablet PC is not purchased with SmartScan, buyers are required to get aninstallation-compatible smart
device and request the SmartScan App from SONOWIN or a local dealer for self-installation.
---- The interface of the ultrasond system can be switched into difference language when the smart bablet is
switched to.
Suggestion:
 Buyers are advised to purchase the smart device together with SmartScan to avoid installation problems.
 The smart device offered is Huawei Honor 2, 8 inch screen.
EN - MS Smartscan Manual
Tap this icon to save the cine-loop images.
Reminder: This function can only be enabled when the smart device has 2G available memory space.
After freezing the image, tap this key to cine-loop the images . The maximum is 128 frames
---- Tap this key again to pause the playback.
---- Swipe the screen left or right to play back the image frame by frame;
---- The temporary saving number of the current image is prompted as 023/ 128.
After the images are frozen, the number onthe progress bar indicates the maximum frame number of the
real-time scanned images before freezing.
Roll the slider and the frame number of the currently displayed image will change accordingly.
This icon indicates the battery power of SmartScan;
--- When the battery is fully charged, there will be 4 bars.
--- Please to charge the SmartScan when there is only one bar left.
This icon displays the current mode.
PT -- Pregnancy Test; BF -- Back Fat measurement
Noticed: This icon does not work in Version C
Date: Year/Month/Date
(Year is shown in 4 digits and month and date in 2 digits; "0" will be prefixed if there is only 1 digit.)
Time: 24-hour base
This icon displays the current gain information.
Swipe the right part of the screen up and down to adjust the current gain.
This icon displays the current depth information.
Swipe the left part of the screen up and down to adjust the current depth.
ID means the ear mark of the animal.
---- The ear mark could be as ear-tag, or barcode, or QR or any
So there are four (4) difference way tobe entered:
1) by reading ear-tag with RFID tech ---- Only available in SmartScan A
2) by inputting manual ---- Available in the whole SmartScan series.
3) by scanning the barcode --- Available in the whole SmartScan series.
4) by scanning QR code --- Available in the whole SmartScan series.
character
13
input by manual.
46