Ear-Mark Input; Input By Manual - MS Schippers SmartScan Manual Del Usuario

3

Ear-mark Input

It would not be the practically meanningful if the ear-mar (or ID) of the tested animal does not be input
whenever the frozen images or backfat measuring conclusions is saved.
The saved image will saved on an indpenent "Report" page. The conclusion of diagnosie and the measuring
results will be saved in an Excel datababes. Both the Report and the data can be transferred from the smart table
to any other device and PC.
The ear-mark can be entered in the following four ways:
1) by mannual
2) by readinng ear-tag automattically .
3) by scaning the barcode automatically
4) by scanning QR automatically
SmartScan comes in the following difference versions:
(1) high version A
(2) standard version B
(3) basic version C
Version A is with RFID for both FDX and HDX.

3.1 Input by manual

To save the scanned image and its diagnosis conclusion and send it to the management system, the ear mark of
the tested animal must be entered as follows:
1) View the images scanned in real-time and freeze the satisfactory one.
2) Press the Save Key and the "Report" page will pop up on the screen:
EN - MS Smartscan Manual
Important:
The images must be frozen before they can be entered.
20
20
53