Reading Ear-Tag (Rfid) - MS Schippers SmartScan Manual Del Usuario

6) Check the report information and press the Ok key on the report page.
The report will then be saved in the smart device. Press the Cancel key to not save the report.
The path for saved Report: local RAM directory\MYJC\report\report_2017_05_23 09-23.pdf
The report files are named as:
7) See 3.5 Single Report for more report details.

3.2 Reading Ear-tag (RFID)

SmartScan in Verions A can read the ear-tag by switching on the sub-key RFID instead of manual entry.
Specifically:
1) View the images scanned in real-time and freeze the satisfactory one.
2) Activate the Sub-Key and put the rear protecting part of the device close to the electronic ear tag worn by
the animal.
---- Once the ear-tag is read, a beep from the SmartScan will be heard and the ear-tag number will be
instantly displayedin the ID area on the left upper corner of the screen.
---- The ear-tag must be read within 10 seconds after Sub-Key is activated.\
---- The ear-tag can be automatically read as shown below:
3) PT Result
4) Remark s
5) Check the report information
(Complete Step 3 to 5 as instructed in by Manual)
EN - MS Smartscan Manual
(Words or sentences can be entered in the Remarks column based on the actual conditions of the farm.)
record_Year/Month/Date_Hour/Minute.pdf
22
22
55