Functions And Operations; Function Keys; Smartscan Function Keys - MS Schippers SmartScan Manual Del Usuario

2

2.1 Function Keys

2.1.1 SmartScan Function Keys

Key Name
Main Key
EN - MS Smartscan Manual

Functions and Operations

Main Key
RFID
Sub-Key
Function
Press down and hold the key with the thumb for about 7 seconds to power on the
SmartScan. The main key will turn in blue and its indicator will flicker at a slow rate.
Power
Immediately the SmartScan will automatically search for matching WIFI.
On/Off
During use, press and hold the key for 7 seconds to power off the SmartScan. The
indicator of the MainKey will then be turned off and the power disconnected.
The WIFI will be enabled when the device is powered on. Once the WIFI is connected,
the blue indicator of the PrimaryKey will flicker at a fast rate. "Connected" will flash on
wifi
the screen.
If the WIFI is not connected, the blue indicator of the PrimaryKey will continue to
Enable
flicker at a slow rate. After flickering for 1 minute, the device will shut down
automatically.
After the WIFI is connected, press the Real-time/Freeze Key to enter the real-time scan
Real-time/
mode;
Freeze Then press it to freeze/unfreeze the image.It works the same way as the Freeze Key on
the smart interface.
The main key has the following three functions:
---- Power on/off
---- wifi enable
---- Image frozen/defrozen
The sub-key is for switch on/off reading ear-tag.
---- it is availabe on premium version A only.
---- It works only when image is frozen.
Operations
11
44