Miltenyi Biotec gentleMACS Manual Del Usuario página 52

3. Plug the instrument into the power mains.
WARNING ! The instrument is equipped with a three-wire electrical groundingtype plug. This is a safety
feature to reduce the risk of electric shock. Do not insert the plug into a non-grounded power outlet. If you
cannot insert the plug into the outlet or if you are not sure whether the outlet is grounded, contact your local
electrician.
The instrument should only be operated from a power source whose specifications match those indicated on
the instrument's electrical ratings label. If you have questions about the type of power source to use, contact
your authorized Miltenyi Biotec service provider or local power company. Ensure that the mains switch as
well as the connector for the power cable are easily accessible and located as close to the operator of the
instrument as possible. If it is necessary to disconnect the instrument's power supply, unplug the cable from
the power outlet.
2
4. Set the switch located above the plug socket to ON ("I" indicates "ON", "O" indicates "OFF").
5. The instrument will perform a start-up check that runs for a few seconds.
50