Deleting Programs; Setup; Set Led; Set Clock And Date - Miltenyi Biotec gentleMACS Manual Del Usuario

4.5.5

Deleting programs

To delete a program:
1. Select the User folder containing the required program.
2. Highlight the program to be deleted.
3. Press Delete to remove the program.
4. Press OK to confirm or Cancel to abort the process.
Note: Files located in the Miltenyi and Template s folder cannot be deleted.
Note: Deleting a shortcut in the Favorites folder will not delete the original program.
4.6

Setup

Setup menu is used to manage the following device settings:
The
Set LED – switch the LEDs on or off
l
Set time – set the time
l
Set date – set the date in the format dd-mm-yyyy
l
Set folder name – name/rename User folders
l
Software version – get information on the software version that is installed on the instrument.
l
Serial number – get information on the serial number of the instrument.
l
4.6.1

Set LED

To set the LED for the instrument:
1. Press Set LED.
2. Press Set LED on or Set LED off as required.
4.6.2

Set Clock and date

The procedures to modify the time and date are identical. The following example shows the change of date.
1. Press Set date.
2. Press the desired parameter: day (dd), month (mm), and year (yyyy).
3. Modify the parameter using the touchscreen.
4. Press OK to confirm or Exit to cancel.
4.6.3

Set folder name

To name or rename
1. Press Set folder name.
2. Select the required folder.
Note: Default values for User folders are User_1, User_2, User_3, User_4, User_5.
3. Enter the new name using the touchscreen. The folder name cannot exceed nine characters.
4. Press OK to save or Exit to cancel.
User folders:
4
75