Editing Programs - Miltenyi Biotec gentleMACS Manual Del Usuario

Note: Program names can be a maximum of 16 characters. Select CAP to alternate between upper- and lower-
case characters.
14. Select OK on the keypad to save the program. The program will be automatically saved to the folder selected
in step 1. In this example, this is the folder User_1.
Note: The duration of a gentleMACS™ Program is limited to 3,200 rounds per run . For example, a program
that consists of one
consists of one
that consists of one
It is not recommended to run programs exceeding this limitation! Miltenyi Biotec does not guarantee proper
function of the instrument and disposables above this value. However, when saving a program exceeding 3,200
rpr a pop-up screen will appear displaying a warning message and the current rpr value. Press
program. Press
4.5.2

Editing programs

To edit a program:
1. Select the Templates or User folder containing the required program.
Note: Files located in the Miltenyi and Favorites folders cannot be edited. The Miltenyi folder contains
gentleMACS™ Programs that have been optimized by Miltenyi Biotec for a variety of applications. These
programs cannot be altered. The Favorites folder contains shortcuts to the original programs located in the
Templates, Miltenyi, or User folders.
Note: The template programs A to E provided by Miltenyi Biotec can be used to create a user-defined program.
The newly created program has to be renamed and saved in one of the five User folders.
spin command at 4,000 rpm can run for a maximum of 48 seconds; a program that
spin command at 200 rpm can run for a maximum of 960 seconds (16 minutes). A program
spin command at 20 rpm can run for a maximum of 160 minutes.
Abort to re-edit the program.
OK to save the
71
4