Parts Supplied; When Installing The Antenna Inside The - Pioneer AVIC-505 Manual De Instalación

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
Installation

Parts supplied

GPS antenna
When installing the antenna inside the vehicle (on the dashboard or rear shelf)
Affix the metal sheet on as level a surface as possible where the GPS antenna faces outside
the window. Place the GPS antenna on the metal sheet. (The GPS antenna is fastened
with its magnet.)
Note:
• Some models use window glass that does not allow signals from GPS satellites to pass through. On
such models, install the GPS antenna on the outside of the vehicle.
17
Metal sheet
GPS antenna
Clamp (5 pcs.)
Metal Sheet
Peel off the protective sheet
on the rear.
Make sure the surface is
free of moisture, dust,
grime, oil, etc., before
affixing the metal sheet.
Note: The metal sheet
contains a strong adhesive
and may leave a mark on
the dashboard if it is
removed.
Clamps
Use clamps to secure the
lead where necessary inside
the vehicle.
Waterproof pad

Publicidad

Tabla de contenido
loading

Tabla de contenido