After Ironing - Imetec TITANOX H3902 Instrucciones De Uso

GB
Warnings: the plate temperature LED (1) goes on intermittently while ironing, thereby
indicating that the selected temperature is maintained.
Press the super-steam button (4) to generate a strong shot of steam that penetrates the
fabric and eliminates the most difficult creases [Fig. E].
Wait a few seconds between each pressing action of the iron.
Press the super-steam button (4) intermittently to iron in an upright direction (curtains, hung
clothes, etc.) [Fig. F].
Warnings: the super-steam function can only be used at high temperatures.
Stop the steam when the plate temperature LED (1) lights up and start ironing when this
goes off.
SPRAY FUNCTION
Verify that there is water in the reservoir (10).
Press the spray button (3): slowly for dense spray or fast for mist [Fig. G].
Warnings: first dampen the fabric lightly using the spray function (3) or alternatively, lay a
damp cloth between the fabric and the iron.
Do not use the spray on silk or synthetics.

AFTER IRONING

EMPTYING THE IRON
Disconnect the plug (11) from the socket.
Empty the reservoir (10) by turning the iron upside down and shaking it lightly.
Let the iron cool down completely in an upright position.
MAINTENANCE
CLEANING
ATTENTION!
the iron.
Any starch deposits or residue on the surface of the plate can be removed with a damp cloth
and non-abrasive liquid detergent.
Avoid scratching the plate with steel wool or metal objects.
The plastic parts can be cleaned with a damp cloth and then wiped with a dry cloth.
16
MI001087.indd 7 26/01/13 12.23