Canon FAX-JX500 Guia Del Usuario página 27

1
Press [Caller History], then wait for 2 seconds or press any button.
The numbers, names, and date and time from which you have received calls recently will be
displayed on the LCD.
01: 3456XXXX
Press [Redial] or [Coded Dial/Directory] to switch between the date and time, name, and
phone/fax number on the LCD.
2
Use [ ] or [ ] to select the receiving party, then press [Start].
The fax begins calling the number.
Switching Temporarily to Tone Dialing
Many information services for banks, airline reservations, hotel reservations, etc. require tone
dialing for their services. If your machine is connected to a rotary pulse line, you can set the
machine to temporarily switch to tone dialing.
1
Press [Hook] or lift the handset.
2
Use the Numeric buttons to dial the number of the information service.
3
When the recorded message of the information service answers, press [Tone] ([ ])
to switch to tone dialing.
If you pressed [Hook] in step 1 and wish to talk to the other party, lift the handset.
4
Use the Numeric buttons to enter the numbers requested by the information
service.
5
When you have finished using the service, press [Hook] or hang up the handset.
Long-Distance Dialing
When you register a long-distance number, you may have to insert a pause within or after the
number. For long-distance dialing, the location and length of the pause may differ depending on
the telephone system. To enter a pause, press [Pause]. The length of this pause can be
adjusted. See <PAUSE TIME> on page 51. A pause at the end of a number is fixed at 10
seconds.
Redialing When the Line is Busy
There are two methods of redialing: manual redialing and automatic redialing. This section explains
these two methods.
Manual Redialing
Press [Redial] to dial the last number you dialed with the numeric buttons*. (This starts redialing
regardless of whether automatic redialing is enabled.)
*This setting is only available when you dialed with the numeric buttons.
CANON 20/12 2006 13:30
Sending Faxes 23