Canon FAX-JX500 Guia Del Usuario página 30

9
The fax will automatically dial at the programmed time.
Sending Other Documents While the Fax is Set for Delayed Sending
You can send, receive, and copy other documents even when the fax is set for sending at a
preset time.
To send or copy other documents after setting the fax for delayed sending, simply send or copy
using any other sending procedure in this guide.
Note
Delayed sequential broadcasting is applicable for sending one document to more than one location
at a later time when multiple fax numbers are dialed (see page 27).
Canceling Delayed Sending
1
Press [Menu].
2
Use [ ] or [ ] to select <MEMORY REFERENCE>, then press [Start].
3
Use [ ] or [ ] to select <DELETE DOCUMENT>, then press [Start].
TX/RX NO.
4
Use [ ] or [ ] to select the transaction number (TX/RX NO.) of the document you
want to delete, then press [Start]. The LCD displays <YES=( ) NO=(#)>.
If the LCD does not change after you press [ ] or [ ], this means only one transaction is
stored in memory.
If you are unsure of the transaction number (TX/RX NO.), print the <DOC. MEMORY
LIST>. (see page 36).
5
Press [ ] to delete the document.
If you want to continue sending, press [#].
6
Press [Stop].
The fax returns to standby mode.
26 Sending Faxes
0001