Canon FAX-JX500 Guia Del Usuario página 34

8
Use [ ] or [ ] to select <RECEIVE> or <DISCONNECT>, then press [Start].
This setting tells the fax what to do if the Handset is not picked up within the specified ring
time set in step 6.
9
Press [Stop].
Setting ends and the fax returns to standby mode.
Receiving Documents Manually: MANUAL MODE
1
Check that <Manual> is displayed on the LCD (see page 29).
15:00
2
When you hear the fax or extension phone ring, pick up the Handset.
3
If you hear a person's voice:
Start your conversation. If the caller wants to send a document after talking to you,
ask them to press the start button on their fax machine.
When you hear a slow beep, press [Start] on the fax to begin receiving the
document. Hang up the Handset.
If the extension phone is located away from the fax, dial 25 (the remote receiving ID) on the
extension phone and hang up.
The fax begins receiving the document.
If you hear a slow beep tone:
Someone is trying to send you a document.
Press [Start] and replace the Handset.
If the extension phone is located away from your fax, dial 25 (the remote receiving ID) on
the extension phone and hang up.
The fax begins receiving the document.
Note
Be sure to replace the Handset after you press [Start] otherwise the call will be disconnected.
Receiving Documents with an Answering Machine: ANS.MACHINE
MODE
Connecting an answering machine to your fax allows you to receive documents and telephone
messages while you are out.
Using Your Fax with an Answering Machine
Follow these guidelines when using your fax with an answering machine.
Set the answering machine to answer on the first or second ring.
When recording an outgoing message on the answering machine, the entire message must
be no longer than 15 seconds.
30 Receiving Faxes
Manual