Canon FAX-JX500 Guia Del Usuario página 54

USER SETTINGS
Name
DATE & TIME
UNIT TELEPHONE #
UNIT NAME
TX TERMINAL ID
FAX/TEL No. MARK
TTI POSITION
SCAN CONTRAST
OFFHOOK ALARM
VOLUME CONTROL
CALLING VOLUME
LINE MONITOR VOL
ALARM VOLUME
KEYPAD VOLUME
HANDSET VOLUME*
RX CALL LEVEL
TEL LINE TYPE**
COPY RATIO
DIAL SECURITY
* Only available in some countries.
** In Australia and New Zealand, select <TOUCH TONE>. You cannot use <ROTARY PULSE>.
REPORT SETTINGS
Name
TX REPORT
PRINT ERROR ONLY:
OUTPUT YES:
OUTPUT NO:
RX REPORT
50 Settings and Activity Reports
Description
Set the date and time (24-hour clock) using the numeric
buttons.
Enter your fax number using the numeric buttons.
This is the name that appears at the top of each fax page you
send (see page 11).
This option sets the parameters for the identification header
that appears on every page you send.
Select the icon for the fax number.
Select the position of the TTI.
Set the density of the reproduction.
Enable/disable the off hook alarm. The alarm alerts you that
the Handset is not seated properly in its cradle.
Set the volume of the fax sounds.
Set the volume of the ring sound.
Set the volume of the line monitor (sound during dialing).
Set the volume of the error alarm sound.
Set the volume of the keypad.
Set the volume of the Handset. This setting can be changed
during a call, with [ ] or [ ].
Set the ring tone.
Set the dialing method the fax uses to match the type of
phone line you have.
Set the enlargement and reduction and ratio for copying.
Enable/disable the dial security. When it is ON, it will ask you
to dial the number twice to prevent dialing the wrong number.
The fax will dial the number after confirming the number you
dialed in twice are matched.
Description
Enable/disable automatic printing of the transmission report.
Print only when an error occurs during sending.
ATTACH TX IMAGE:Print a transmission report attaching its
image.
Set the fax to print a transmission report every time you send
a document.
ATTACH TX IMAGE:Print a transmission report attaching its
image.
Turn off the transmission report feature.
Enable/disable automatic printing of the reception report.
Settings
–
–
–
ON/OFF
FAX/TEL
OUTSIDE IMAGE/
INSIDE IMAGE
STANDARD/
DARKER/ LIGHTER
ON/OFF
–
0 (off)/1/2/3
0 (off)/1/2/3
0 (off)/1/2/3
0 (off)/1/2/3
1/2
STANDARD/HIGH
TOUCH TONE/
ROTARY PULSE
100% AS IS/86%/70%/
50% MIN/200% MAX/
141%/115%
ON/OFF
Settings
-
YES/NO
YES/NO
-
PRINT ERROR ONLY/
OUTPUT YES/
OUTPUT NO