Optional Accessories - Comet BPS TANDEM Instrucciones Para El Ensamblaje Y El Mantenimiento

Tabla de contenido

Idiomas disponibles

- liquids with temperatures and pressures outside the window indicated for the specific pump

series (→MS);

- liquids containing granules or solid parts in suspension.

• The pump must not be integrated in machines designed to wash: people, animals, energized electrical

apparatus, delicate objects, the pump itself or the machine in which it is integrated.

• The pump is not suitable for being integrated in machines designed to operate in environments with

special conditions such as, for example, corrosive or explosive atmospheres.

• For integration in machines designed to operate on board vehicles, ships or planes, contact the

Manufacturer's Technical After-Sales Service, inasmuch as additional requirements may be necessary.

All other uses are to be deemed incorrect.

The Manufacturer disclaims all liability for any damage deriving from incorrect or erroneous

uses.

WARNING

• The operation of the pump may be impaired if unsuitable accessories are used and they may even make

it dangerous. Only use original accessories endorsed by the Manufacturer.

• Refer to the documents provided with the optional accessories for information regarding their general

use, safety warnings, installation and maintenance

The standard accessories for the pump can be integrated with the following range of accessories:

• safety valve

• protection for pump shaft

• control unit

• intake fi lter (deep fi lter)

• various shapes and sizes of intake couplings

• pressure gauge

• high pressure delivery pipe

• pipe reel

• various types of sprinkler lances

• indicator of ruptured diaphragm (for diaphragm pumps only).

Please contact your dealer for further information.

WARNING

• The pump cannot be operated unless the machine in which it is integrated conforms to the safety

requirements laid down by European directives. Such conformity is indicated by

and by the declaration of conformity of the Manufacturer of the machine in which the pump is

integrated.

• Before starting the pump, carefully read the instructions in its manuals and in the manual of the machine

in which the pump is integrated. In particular, make sure you have correctly understood how the pump

and the machine in which it is integrated work as regards liquid on/off operations.

• Perform the preliminary operations indicated by the Manufacturer of the machine in which the pump

is integrated.

• Make sure all deliveries are off or connected to accessories that have been turned off (e.g., tap closed or

sprinkler lance in closed position).

• Make sure that the moving parts of the pump are suitably protected and that they are not accessible to

unauthorised persons.

• Do not exceed the maximum level of accumulator infl ation pressure (when present), indicated in the

following table, at any time.

• In the application in which the pump is driven by a cardan shaft, avoid any pushing on the pump shaft

due to lack of lubrication of sliding parts.