Hach TU5300 sc Manual Básico Del Usuario página 28

9.7 Replace the desiccant cartridge
The controller display will show when a desiccant cartridge replacement is due. Refer to the
documentation included in the desiccant cartridge bag to replace the desiccant cartridge.
9.8 Replace the tubing
Replace the tubing when the tubing has a blockage or has damage.
Turn the flow shutoff valve to stop flow to the instrument. Then refer to
on page 17 to replace the tubing.
Section 10 Troubleshooting
Refer to the expanded user manual on
10.1 Reminders
Reminders show on the controller display. To see all of the reminders, push menu then select
DIAGNOSTICS>TU5x00 sc>REMINDER.
Message
DRYER RANGE The desiccant cartridge capacity
is low.
PERFORM CAL A calibration is due.
PERFORM VER A verification is due.
WIPER REPLACE A wiper replacement is due in the
automatic cleaning module.
28 English
www.hach.com
Description
Plumb the instrument
for troubleshooting information.
Solution
Replace the desiccant cartridge. Refer to the
documentation supplied with the desiccant cartridge.
Do a calibration. Refer to
Do a verification. Refer to
Replace the wiper in the automatic cleaning module.
Refer to the documentation supplied with the automatic
cleaning module to replace the wiper.
Calibration on page 21.
Verification on page 21.