Control Panel - Sencotel 121c Manual De Empleo

2.3. Datos técnicos
A continuación se recogen los datos y las características
técnicas.
Model
Dimensions
L x P x H (mm)
Machine weight (kg)
Maximum power consumed
(W)
Operating voltage (V)
Operating temperature
Flavours
Fridge tank capacity
Hourly production*
Recommended portion
Probe pressure
Class
* The production and the quantity of the mixture can vary
depending on the temperature and the type of mixture used.
The performances refer to a 25º C room temperature.
Note: The manufacturer reserves the right to
make modifications to
the machine without giving prior notice.
Warning! Any modification and/or addition of
accessories must
be explicitly approved and performed by the
manufacturer.
7
121c
290 x 580 x 870
88
See the technical detail
plate located on the
back of the machine
Min. 25°C - Max 32°C
1
5 L
180 portions of 70 g
70 g
<70 dBA
N

2.4. Control panel

The controls and the symbols of the control panel are
described as follows:
Viewed on
Mode:
display:
STOP
During this mode the machine is stopped and the associated
red LED lights up. The display shows StP.
Mode: Viewed on display:
Selection Prd, Sto,CLE
By pressing this key several times the following modes can be
selected: Prd (ice-cream production), Sto (maintenance), CLE
(clean/load/empty).
The key also serves to eliminate any alarms/messages that
may appear on the screen.
STORE mode (Sto)
The lighting LED indicates that the mode is
activated
CLEAN/LOAD/EMPTY mode (CLE)
The lighting LED indicates that the mode is
activated
PRODUCTION mode (Prd)
The lighting LED indicates that the mode is
activated
Tank product REFILL need ICON
Tank product STIR need ICON
SL320003270 Ed 03_EN
StP