Cleaning Of External Drip Tray; Cleaning Of Air Filters; Replacement Of The Product Suction Pump Tube - Sencotel 121c Manual De Empleo

7.3 Cleaning of external drip tray

The external drip tray located under the product distribution tap
should be emptied and cleaned daily.
.
Lift the tray with its grid and remove it from its position by
pulling it outwards.
Wash the tray and the grid separately using tepid water. Dry all
of the components. Replace the grid on the tray. Replace the
tray in its position and press it downwards to fix it properly to
the machine.

7.4 Cleaning of air filters

The air filters are located at both sides of the machine. They
can be easily removed using the corresponding grip.
Remove the dirt and dust from the filters and replace the filters
on the machine.
The machine's air filters must be cleaned
regularly
Dirty air filters can place the machine's
proper operation at risk.
21
7.5 Replacement of the product suction pump
tube
It is advisable to replace the product suction
pump tube every 3 months
The machine comes with a product suction pump tube kit.
The replacement of the suction tube must be
made with the machine previously emptied.
Para la sustitución del kit proceder del siguiente modo.
1) - DISMANTLE THE PRODUCT SUCTION TUBE USED BY
THE MACHINE
- Remove the fridge top tray. Press the tray retainer and
remove it pulling downwards.
.
- Open the peristaltic pump by opening its lid.
SL320003270 Ed 03_EN