Agitator Disassembliy; Disassembly Of Product Suction Tube - Sencotel 121c Manual De Empleo

Remove any possible product residue from the tap body and
dismantle it as follows:
- using the lever (G),raise the plunger (H).
- remove the O-ring and the tap pin (I) that block the lever (G).
- remove the lever (G).
- remove the plunger from its place (H).
- remove the tap body bolt (L).
- remove the rest of O-rings.
7.1.3 Agitator disassembly
Remove the agitator from its place inside the cylinder, taking
special care not to hit off the cylinder wall.
SL320003270 Ed 03_EN
Remove the drive shaft seal by slindingalong the length of the
shaft.

7.1.4 Disassembly of product suction tube

To remove the product suction tube, proceed as follows:
- Remove the fridge top tray from inside the fridge. Press the
tray retainer and remove it pulling downwards.
- Open the peristaltic pump by opening its lid.
.
Extract the product suction tube by carefully removing it from
the peristaltic pump.
16