Identification; Nameplate - Grundfos SEG Instrucciones De Instalación Y Operación

4. Identification

4.1 Nameplate

The nameplate states the operating data and approvals applying to the pump. The nameplate is fixed with
rivets to the side of the stator housing near the cable input to the motor.
The additional nameplate supplied with the pump can be fixed close to the pit.
10
11
12
13
14
Fig. 3 SEG nameplate
Pos. Description
1 FM-description
2 Type designation
3 Product number + serial number
4 Maximum liquid temperature
5 Production code (YYWW)
6 Speed [rpm]
7 Maximum head [m]
8 Rated power input [kW]
Rated voltage, Δ
9
10 Rated voltage, Y
11 Starting capacitor [μF]
12 Run capacitor [μF]
13 Frequency [Hz]
14 Electrical safety*
15 Approval
* For USA and Canada
1
2
3
4
5
6
7
8
9
~
Pos. Description
16 Mark for continuously operated motor
17 Enclosure class to IEC
18 Phases
19 Motor safety factor
20 Maximum installation depth [m]
21 Maximum flow rate [l/s]
22 Rated power output
Rated current, Δ
23
24 Rated current, Y
Cos φ, 1/1 load
25
26 Net weight [kg]
27 Insulation class / temperature rise
28 Place of production
29 Grundfos logo
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
7