Commissioning - SICK GSE6V Instrucciones De Operación

6

COMMISSIONING

6 Commissioning
8
Table 3: DC
PNP: Q (≤ 100 mA)
NPN: Q (≤ 100 mA)
PNP: Q (≤ 100 mA)
NPN: Q (≤ 100 mA)
1 Alignment
Align the sender with the receiver. Select the position so that the red emitted light beam
hits the receiver. Tip: Use white paper or a reflector as an alignment aid. The sender must
have a clear view of the receiver, with no object in the path of the beam
must ensure that the optical openings (front screen) of the sensors are completely clear.
Align the sender with the receiver. Select the position so that the infrared light (not visible)
hits the receiver. The correct alignment can only be detected via the LED indicators. See
figure and table 3. The sender must have a clear view of the receiver, with no object in the
path of the beam. You must ensure that the optical openings (front screen) of the sensors
are completely clear.
+ (L+)
Q
– (M)
+ (L+)
Q
– (M)
+ (L+)
Q
– (M)
+ (L+)
Q
– (M)
[see
Subject to change without notice
+ (L+)
Q
– (M)
+ (L+)
Q
– (M)
+ (L+)
Q
– (M)
+ (L+)
Q
– (M)
figure]. You
8021852 | SICK