Bosch Rexroth BT356 Manual De Instrucciones página 29

3 609 929 B68/2008-11 | BT356
19" assembly
The left and right fixture bars mounted on the
front of the BT356 are designed for use in a
19" frame. Guide rails attached to the sides
of the card rack are required to simplify
mounting and to provide additional support.
The installation position is horizontal.
Side guide rail
Fig. 3: Assembly in a 19" frame
Assembly on a mounting plate
The BT356 can also be screwed onto the
rear with a mounting plate (Fig. 4). Mounting
brackets, which are available as accessories,
(Tab. 1) can be used for this purpose. The
installation position is horizontal.
Mounting
bracket
Rear
Fig. 4: Assembly on a mounting plate
Table 1: Mounting bracket
Type
Mounting bracket set
NK
Front
Order number
3 608 878 116
Bosch Rexroth AG
Several card racks are required to configure
multi-channel tightening systems. The card
racks can be lined up on top of each other
(Fig. 5) or next to each other (Fig. 6).
BT356
no.1
BT356
no.2
Fig. 5: Example 1: Control cabinet application -
lined up on top of each other
NK
Maximum air
intake
temperature
60 °C
Fig. 6: Example 2: Control cabinet application -
lined up next to each other
29/124
}
100 mm space
for air
circulation
NK
Maximum air
intake
temperature
NK 60 °C
NK