Parts Overview - AL-KO Garden + Hobby MS 2600 Instrucciones De Uso

Installation MS 2600 / MS 3300 L

Parts overview

(Fig. 7)
1 String head
2 Drive plate
3 Guard
4 "Loop" bike grip
5 Handgrip, see "Starting the engine"
6 Eyelet
Caution!
The machine must not be operated before assembly
work has been completed.
Mounting the L-grip (Fig. 8)
4. Place the rubber sleeve (8-2) over the support bar.
5. Screw together the upper (8-3) and lower (8-1) halves
of the grip with four Allen screws (8-4) through the
rubber sleeve.
474 698_a
Installation MS 3300 B / MS 4300
Parts overview
(Fig. 10)
1 Cutter
2 Drive shaft
3 Guard
4 "Bike" grip
5 Handgrip, see "Starting the engine"
6 Strap attachment bar
Caution!
The machine must not be operated before assembly
work has been completed.
"Bike" grip (Fig. 11)
1. Place spring (11-1) in holder in support bar.
2. Place the lower grip holder (11-2) on the spring.
3. Place the marked (striated) area of the grip rod (11-3)
into the lower grip holder. The upper brace (11-4)
must click into the lower brace (11-2).
4. Fasten the upper brace (11-4) to the grip holder with
the screw (11-5).
5. The seat of the holder on the support bar can be shift-
ed as required.
GB
19