Preset Cooking Functions - STARFRIT 024603 Instrucciones De Uso

PRESET COOKING FUNCTIONS

- | + TIME ADJUSTMENT
Cooking times may be adjusted by pressing the ''+'' (add time) or ''-'' (subtract time).
Once a desired cooking function is selected, Preset cooking light indicator will blink
indicating that the appliance is on standby mode. Use the ''TIME'' function during the
standby mode to adjust the default pressure cooking time. Press start to accept your
desired cook time and function.
MEAT
You may use the SAUTÉ function to brown meat prior to cooking. Refer to SAUTÉ
section. Add all ingredients and liquid inside the cooking pot. Ensure there is enough
liquid (water or broth). Refer to Fig. 6.
Close the lid until you hear a ''click'', plug the appliance.
Select MEAT function. Appliance will beep, light indicator near the selected button
1.
will blink (standby mode). The default time for this function is 15 minutes.
While blinking, the setting LOW will appear. The setting LOW is for the poultry
2.
meat. To get a different setting, press a second time, the setting will change to
MED setting, this setting is for Beef and time will change to 25 minutes. A third
setting is available, press a third time on MEAT function, the setting will change
to HIGH setting, this setting is used for Pork and time will change to 45 minutes.
NOTE: In any setting, the time can be adjusted by pressing the ''+'' and ''-''.
NOTE: These presets are for reference only. Actual cooking times may vary.
Press START button to accept the setting. As temperature increases and pressure
3.
builds, the animated rolling bars will appear, and the HEATING light will appear.
When the temperature is reached, the PRESSURIZING light will illuminate,
4.
pressure will build inside.
The countdown time begins when the COOKING light will illuminate.
5.
During the countdown the COOKING light and then the DEPRESSURIZING light
6.
will illuminate to show the next stage of the cooking process.
7. When the cook time counts down to 00:00, the appliance will beep 5 times.
8. The appliance will stay in WARM function, light indicator will appear at the WARM
function. The WARM function may stay on for up to 24 hours.
9. To avoid over-cooking the food, press the CANCEL button. The light will disappear,
the cooking time display will show 00:00.
14