STARFRIT 024603 Instrucciones De Uso página 8

NOTE: During first use of the appliance, smoke or light vapors may occur from
the appliance because of the initial warming process of the materials. This is
normal and will quickly disappear.
FIG. 1 HOW TO OPEN THE LID
Rotate the lid counterclockwise and lift upward.
FIG. 2 HOW TO REMOVE/REPLACE THE COOKING POT INSIDE THE BASE
Lift the inner cooking pot from the outer pot to wash or fill will food. Insert the cooking
pot back inside the appliance and rotate left and right to make sure it is in contact with
the heating plate. Always ensure the outside of the cooking pot is dry before replacing
inside the appliance.
FIG. 3 HOW TO REMOVE/INSTALL THE PRESSURE RELEASE VALVE
To remove, lift the valve upward. Insert the pressure release valve back into the
outlet. It is normal that the valve fits loose it is required for pressure and temperature
regulation.
Always point the valve to ''sealing'' position when operating and to ''release''
position to manually release the pressure. Pressure won't build inside the appliance
if pressure valve is not sealed properly.
Component Sealing position Release position
8