Operating Instructions - Kobalt SGY-AIR88NB Manual Del Usuario

OPERATING INSTRUCTIONS

The paint sprayer will not properly spray unless the fan direction is either set
vertically or horizontal.
Before using desired paint in the spray gun, spray a compatible thinner or
solvent through the gun to remove any containments and residue.
Before adding paint, make sure all thinner or solvents are removed from the
spray canister.
It is recommended that you pour the material through a filter into a smaller
container prior to filling the paint cup.
Set up a piece of cardboard or other scrap material to use as a target to test
spray. Continue to test spray until the desired spray pattern is achieved.
1. Adjust the direction of the fan by loosening
the air cap ring (A1) by hand and turning it
to either the horizontal or vertical direction.
Tighten the air cap ring by hand.
2. Before spraying, turn the fluid adjustment
knob (E) clockwise until closed. Begin
spraying and slowly adjust the fluid
adjustment knob (E) (See Figure 2).
WARNING
NOTE
1
A1
2
13
Horizontal Fan
Vertical Fan
A2
E