ThyssenKrupp Rothe Erde Manual Del Usuario página 19

Bearing inspection
Table 7: Measurement table
Customer:
ThyssenKrupp Rothe Erde
drawing no.:
Date
Operating hours
Measuring point Basic mea-
surement
Main load area
1
180° opposite
Main load area
2
180° opposite
Main load area
3
180° opposite
Main load area
4
180° opposite
1
Grease sample no. 2
Fe particles ppm/ 3
PQ index 4
5
Grease
Lubrication system
Quantity/interval
Comments
The measurement values, analysis values
and bearing-specific information should be
entered in a separate table (see table 7) and
forwarded to ThyssenKrupp Rothe Erde.
ThyssenKrupp Rothe Erde GmbH
Service
Beckumer Strasse 87
59555 Lippstadt
Germany
service.rotheerde@thyssenkrupp.com
ThyssenKrupp Rothe Erde sends the grease
samples to an approved, qualified laboratory.
Advantage Short processing time and
notification by e-mail about the analysis
results and wear measurement.
Application:
ThyssenKrupp Rothe Erde
order no.:
0
Repeated measurement (12 months interval)
1 2
For the grease sampling set please
contact the following address:
ThyssenKrupp Rothe Erde GmbH
Tremoniastrasse 5–11
44137 Dortmund
Germany
Telephone +49 (2 31) 1 86 - 0
Telefax +49 (2 31) 1 86 - 25 00
sales.rotheerde@thyssenkrupp.com
Disposal at end of useful life
Bearing to be dismantled. Grease, seals and plastic
parts to be disposed of in accordance with waste guide-
lines. Bearing rings and rolling elements to be taken to
the relevant material recycling points.
Location:
Year of manufacture:
3 4 5
ATTENTION
Disposal may involve environmental
risks
• Follow the directives for waste disposal
• Mind the national laws
®
6 7
19
English